Unilift CC9 - A1
The Grundfos Unilift CC pump is a single - stage submersible pump, and its suction inlet can be lowered to a water level as low as 3 mm. This pump is designed for pumping rainwater and gray sewage, such as water from the following sources:
Washing machines, bathrooms, sinks, etc. on the lower floors of buildings to the sewer
Cellars or buildings that are prone to flooding
Drainage wells
Water flowing into surface water wells through inlets from roof gutters, pits, tunnels, etc.
Swimming pools, ponds or fountains.
This pump is suitable for both fixed installation and portable use. It operates automatically. The pump allows solids with a maximum diameter of up to 10 mm to pass freely.
The motor is equipped with an automatic overload protection device that will cut off the motor if it is overloaded. After the motor is cooled to a normal temperature, it will automatically restart.
|
Submersible sewage pump
Unilift CC9 - A1
Number: 96280976
Suitable for
- Commercial sewage treatment
- Domestic sewage treatment
- Industrial wastewater
UNILIFT CC is a single - stage submersible pump used for pumping clean, non - corrosive water and gray water down to a water level of 3 mm. It has a dual outlet, making it easy to adapt to existing piping.
|  |
Technology:
Rated flow rate: 1.88 liters per second
Maximum flow: 3.89 liters per second
Rated head: 6.56 meters
Max. Particle: 10 millimeters
Approvals: CE, LGA, VDE, RCM
Materials:
Pump casing: Polypropylene
PP - GF15
Impeller: Composite
PP 20 GF
Motor: Stainless steel
EN 1.4301
AISI 304
Shaft: Stainless steel
EN 1.4301
AISI 304
Strainer: Stainless steel
EN 1.4301
AISI 304
Installation:
Ambient temperature range: 0 - 40 °C
Interface type: R
Size of connection: 1 1/4 inch
Maximum installation depth: 7 meters
Liquid:
Liquid temperature range: 0 - 40 °C
Liquid temperature during operation: 20 °C
Density: 998.2 kg/m³
Electrical data:
Power input P1: 780 watts
Rated power - P2: 0.465 kW
Power supply frequency: 50 Hz
Rated voltage: 1 x 220 - 240 V
Rated current: 3.5 A
Rated driver speed: 2850 revolutions per minute
Capacitor size - operation: 8 µF/450 V
Enclosure rating (IEC 34 - 5): IP68
Insulation class (IEC 85): B
Self - protection standard: YES
Length of power cable: 10 meters
Cable plug type: AUS
Others:
Net weight: 6.79 kg
Gross weight: 7.55 kg
Transport volume: 0.017 m³
