TP 150-660/4 A-F-A-BAQE-VW3
Close-coupled single-stage volute pump with coaxial suction and discharge ports of the same diameter. The pump features a top-pull design-for example, the power head (motor, pump head, and impeller) can be disassembled for maintenance while the pump casing remains connected to the pipeline. It is equipped with an unbalanced rubber bellows seal, and the shaft seal complies with the DIN EN 12756 standard. Pipe connections are achieved through PN 16 DIN flanges (in accordance with EN 1092-2 and ISO 7005-2 standards). An asynchronous motor with a cooling fan is installed on the pump.
|
TP 150-660/4 A-F-A-BAQE-VW3
No. 99123987
Application:
Commercial Air Conditioning
Single-stage In-line Pump
|  |
Controller:
Frequency converter: None
Liquid:
Liquid conveyed: Water
Liquid temperature range: 0 .. 120 °C
Liquid temperature during operation: 20 °C
Density: 998.2 kg/m³
Technical Data:
Pump speed basis for pump data: 1485 revolutions per minute
Rated flow rate: 361 m³/h
Rated head: 57 meters
Actual impeller diameter: 432 mm
Main shaft seal: BAQE
Shaft seal code: BAQE
Curve tolerance: ISO9906:2012 3B
Materials:
Pump casing: Cast iron
Pump housing: EN-GJL-250
Pump casing: ASTM class 35
Impeller: Cast iron
Installation:
Ambient temperature range: -30 .. 60 °C
Maximum operating pressure: 16 bar
Maximum pressure at specified temperature: 16 bar / 120 °C
Pipe connection standard: EN 1092-2
Interface type: DIN
Connection size: DN 150
Pressure rating for pipe connection: PN 16
Port spacing: 1000 mm
Motor flange size: FF500
Electrical Data:
Motor model: 280S
Rated power - P2: 75 kW
Power supply frequency: 50 Hz
Rated voltage: 3 x 380-415D/660-690Y V
Rated current: 136-126/78.5-75 A
Starting current: 844 %
Cos phi - Power factor: 0.87
Rated speed: 1485 revolutions per minute
Efficiency: IE3 95.0%
IE efficiency class: IE3
Motor full-load efficiency: 95.0-95 %
Motor efficiency at 3/4 load: 95.3 %
Motor efficiency at 1/2 load: 95.2 %
Motor pole number: 4
Enclosure rating (IEC 34-5): 55 (Protect. water jets/dust)
Insulation class (IEC 85): F
Motor number: 83P16240
Other:
Minimum Energy Performance Index, MEI ≥: 0.70
Net weight: 910 kg
Gross weight: 1040 kg
Transport volume: 2.38 m³
