Grundfos BMS Horizontal Multi-Stage Pump Solution For Water Treatment Plants Pressurization And Liquid Transportation 646 Kg

BMS 60-17 HS-B-C-P-A-A

BMS hs AC is a high-speed pump with an asynchronous motor. It is suitable for applications where a high flow and a high pressure is required. Therefore, BMS hs AC is ideal for water treatment plants, pressure boosting, nano filtration, high-pressure cleaning, and liquid transfer.

BMS hs AC pumps are available in five sizes: BMS hs 7, BMS hs 18, BMS hs 30, BMS hs 46 and BMS hs 60.
Depending on its size, the flow rate of a BMS hs AC pump ranges between 12 and 98 m3/h. BMS hs AC pumps can increase the system pressure up to 82.7 bar.

The pump is supplied with a built-in non-return valve, a service connector, an asynchronous high-speed motor, and 3-inch couplings. The motor is protected by output filters against overvoltage and increased operating temperature. As a result, BMS hs AC is very reliable and durable. If maintenance or alignment is needed, BMS hs AC requires only three tools for dismantling, and the shaft seal and thrust bearing are easily accessible.

The stainless-steel pump housing ensures an excellent resistance against corrosive liquids. The overall design of the pump allows applications for different types of water, such as brackish water and sea water.

Horizontal multistage pump BMS 60-17 HS-B-C-P-A-A Number: 99022850 Suitable for Industrial water supply and transportation Seawater desalination Drinking water treatment High - Pressure pumps for reverse osmosis and filtration applications, driven by an asynchronous motor.

• Liquid conveyed: Water
• Liquid temperature range: 0 - 40 °C
• Liquid temperature during operation: 20 °C
• Density: 998.2 kg/m³

• Rated flow rate: 94 m³/h
• Rated head: 540 meters
• Rated flow rate (another value): 60 m³/h
• Approvals: CE, TR
• Curve tolerance: ISO9906:2012 3B

• Pump: Stainless steel (EN 1.4539, AISI 904L)
• Impeller: Stainless steel (EN 1.4539, AISI 904L)
• Motor: Cast iron
• Sleeve: Super Duplex/Duplex steel (AISI 318 LN, EN 1.4462/1.4410)
• Shaft seal: Silicon Carbide/Carbon

• Maximum ambient temperature: 40 °C
• Minimum inlet pressure: 1 bar
• Maximum permissible inlet pressure: 65 bar
• Maximum permissible outlet pressure: 82.7 bar
• Inlet and outlet: 3"/D88.9
• Flange size for motor: FF 500

• Motor model: MMG
• Frame size: 250
• Rated power - P2: 180 kW
• Power supply frequency: 50 Hz
• Rated voltage: 3 x 400 V
• Rated current: 330 A
• Rated speed: 5000 revolutions per minute
• Motor full - load efficiency: 92.9 %
• Number of motor poles: 4

• Net weight: 646 kg
• Gross weight: 799 kg
• Transport volume: 2.3 m³