Hydro Solo-E CRE 15-2
The Grundfos Hydro Solo-E booster set equipped with one pump is a combined unit, consisting of an electronic pump (CRE) equipped with an isolation valve, a check valve, a discharge pipeline, a pressure transmitter, a pressure gauge and a diaphragm tank. The booster set is ready for operation upon delivery.
The features of this pump are as follows:
The impeller and the intermediate chamber are made of stainless steel DIN W.-Nr. 1.4301.
The pump head and the base are made of cast iron.
The assembled length of the shaft seal complies with EN 12756.
The power transmission is carried out through a cast iron split coupling.
|
Water supply unit, Booster unit
Hydro Solo-E CRE 15-2
Number: 99172049
Suitable for
- Commercial water pressure boosting
- Municipal water distribution
- Water supply for residential areas and buildings
Hydro Solo-E is a fully optimized booster system for systems that require constant pressure. It features constant pressure control, flow estimation, and plug - and - play installation.
|  |
Liquid:
Liquid conveyed: Water
Liquid temperature range: 0 - 60 °C
Liquid temperature during operation: 20 °C
Density: 998.2 kg/m³
Technology:
Rated flow rate: 20.5 cubic meters per hour
Rated head: 31.6 meters
Main shaft seal: HQQE
Shaft seal code: HQQE
Installation:
Maximum ambient temperature: 50 °C
Maximum operating pressure: 16 bar
Standard for inlet connection: DIN
Type of inlet connection: DIN
Type of outlet connection: Rp
Inlet size: DN 50
Suction port size: 2 inch
Outlet size: DN 50
2 inch
Flange size for motor: FT130
Electrical data:
Motor model: 100LA
Rated power - P2: 3 kW
Power supply frequency: 50 / 60 Hz
Rated voltage: 3 x 380 - 500 V
Rated current: 5.80 - 4.80 A
Cos phi - Power factor: 0.91 - 0.86
Rated speed: 360 - 4000 revolutions per minute
Enclosure rating (IEC 34 - 5): IP55
Insulation class (IEC 85): F
Motor number: 92984045
Tank:
Tank volume: 25 liters
Others:
Net weight: 71.9 kg
Gross weight: 91.9 kg
