UNILIFT AP50.50.11.A3.V
Model of the submersible rainwater pump
A vertical single-stage stainless steel submersible pump with a vertical outlet and an integrated submersible three-phase totally enclosed motor. The insulation class of the motor is F. The pump is also equipped with a suction filter.
The pump is provided with a 10-meter power cable and a control box, which includes a motor starter and a motor protection device, as well as a 0.8-meter-long power cable. In addition, the pump is equipped with a level switch for automatic start and stop, with its own 10-meter-long cable.
The impeller is a VORTEX impeller that allows a free passage of 50 millimeters. This makes it suitable for pumping surface water, groundwater and similar water.
The pump has a double shaft seal and an intermediate oil reservoir pre-filled with non-toxic premium oil.
The pump is equipped with a delivery pipe and a cooling jacket that continuously cools the motor through the conveyed liquid. Its ball bearings have deep grooves coated with grease, which gives it a long service life.
Since the pump is equipped with a handle, it can be used at any time, and its power supply is completed through a 10-meter power cable. The power cable is of the socket type with a glass sealing compound inside the socket. The sealing compound can prevent moisture from entering the stator winding.
|
Submersible sewage pump
UNILIFT AP50.50.11.A3.V
Number: 96010935
Suitable for
- Commercial sewage treatment
- Domestic sewage treatment
UNILIFT AP50 is a stainless - steel submersible pump used for pumping non - corrosive water and gray water with particles up to 50 mm in size. It can be used as a portable or fixed installation.
|  |
Liquid:
Liquid Temperature Range: 0 - 55 °C
Liquid Temperature during Operation: 20 °C
Density: 998.2 kg/m³
Technology:
Maximum flow: 8.89 liters per second
Type of impeller: VORTEX
Max. Particle: 50 millimeters
Approvals: CE, RCM, LGABG, EAC, TUVRHWID, MORO, UKCA, CNROHSEXP, SEPRO
Materials:
Pump Casing: Stainless steel
Pump housing: EN 1.4301
Pump casing: AISI 304
Impeller: Stainless steel
EN 1.4301
AISI 304
Cable union: Brass
CW602N
C35330
Installation:
Ambient Temperature Range: 0 - 55 °C
Interface Type: Rp
Size of connection: 2 inch
Maximum installation depth: 7 meters
Place of installation: Indoor/outdoor
Electrical Data:
Power input P1: 1.9 kW
Rated power - P2: 1.2 kW
Power Supply Frequency: 50 Hz
Rated voltage: 3 x 400 V
Rated current: 3 A
Cos phi - Power Factor: 0.88
Rated driver speed: 2785 revolutions per minute
Enclosure Rating (IEC 34-5): IP68
Insulation class (IEC 85): F
Length of power cable: 10 meters
Cable Plug Type: NONE
Others:
Net Weight: 15.4 kg
Gross weight: 18.5 kg
