UNILIFT KP.350.M.3
Submersible Rainwater Pump
A vertical single - stage stainless - steel submersible pump with a vertical outlet and an integrated submersible three - phase totally enclosed motor. The insulation class of the motor is F, and it is equipped with a thermal overload protection device.
The pump is equipped with a suction strainer, a carrying handle, and a 5 - meter power cable.
The impeller is a semi - open impeller with a 10 - millimeter free passage. It is suitable for pumping groundwater, surface water, rainwater, and similar liquids.
The pump has a double shaft seal, which consists of two lip seals with grease between them.
The pump has a casing that can continuously cool the motor by the way of conveying the liquid. The rotor shaft runs on two maintenance - free graphite bearings cooled by the conveyed liquid.
The motor is filled with a non - toxic motor liquid.
| Submersible sewage pump
UNILIFT KP.350.M.3
Number: 013m6100
Suitable for
- Commercial sewage treatment
- Domestic sewage treatment
- Industrial wastewater
UNILIFT KP is a compact stainless - steel submersible pump, used for pumping non - corrosive water and reclaimed water. It can be used as a portable device or a fixed installation both inside and outside buildings. |  |
Liquid
- Liquid Temperature Range: 0.. 50 °C
- Liquid Temperature during Operation: 20 °C
- Density: 998.2 kg/m³
Technology
- Maximum Flow: 3.89 liters/second
- Rated Head: 5.36 meters
- Max. Particle: 10 mm
- Approvals: CE, LGABG, EAC, TUVRHWID, MORO, UKCA, CHROHS, SEPRO
Materials
- Pump Casing: Stainless steel
- Pump housing: EN 1.4301
- Pump Casing: AISI 304
- Impeller: Stainless steel
- EN 1.4301
- AISI 304
Installation
- Ambient Temperature Range: 0.. 50 °C
- Interface Type: Rp
- Size of Connection: 1 1/4 inch
- Maximum Installation Depth: 2 meters
- Place of Installation: Indoor
Electrical Data
- Input Power - P1: 700 W
- Rated power - P2: 0.35 kW
- Power Supply Frequency: 50 Hz
- Rated voltage: 3 x 380 - 400 V
- Rated Current: 1.3 A
- Encapsulation Class (IEC 34 - 5): IP68
- Insulation class (IEC 85): F
- Length of Power Cable: 5 m
- Type of Cable Plug: NONE
Others
- Net Weight: 7.1 kg
- Gross weight: 7.7 kg
- Transport Volume: 0.013 m³
