DP10.65.26.2.50B
The Grundfos DP pump is a portable pump suitable for both household and industrial applications.
The pump features multiple blades and a semi-open impeller that allows the free passage of objects up to 10 millimeters in size. It is suitable for pumping:
- Discharged water
- Surface water
- Groundwater
- Industrial process water without solids and fibers
Its compact design makes the pump suitable for both temporary and permanent installations.
The pump is a cast iron submersible pump equipped with an integrated 3-phase submersible motor. It has the approval of LGA.
The pump has an intermediate oil chamber pre-filled with non-toxic special oil.
The pump is equipped with a cable plug for easy disassembly. The plug is sealed with polyurethane to prevent water from seeping into the motor through the cable.
There is a cable clamp between the pump casing and the motor, ensuring convenient and safe disassembly and assembly. On-site inspection can be carried out without any special tools.
The pump is equipped with a unique double shaft seal in a cylindrical design. The shaft seal can be replaced very quickly on-site without the need for any special tools. It also eliminates the risk of faulty installation.
The insulation class of the motor is F, and it is equipped with long-life deep groove ball bearings lubricated with grease.
The pump has a DN 65 outlet and can be installed either independently or in an automatic coupling system.
| Submersible sewage pump
DP10.65.26.2.50B
Number 96106542
Suitable for
- Commercial sewage treatment
- Domestic sewage treatment
- Sewage transportation
Rainwater pump |  |
Controller:
- Humidity sensor: None
- Capacitive sensor for detecting impurities in the liquid: None, no oil and water content sensor
- AUTOADAPT: No
Liquid:
- Liquid temperature range: 0..40 °C
- Liquid temperature during operation: 20 °C
- Density: 998.2 kg/m³
Technology:
- Rated flow rate: 8.09 liters per second
- Maximum flow: 12.8 liters per second
- Rated head: 17.96 meters
- Type of impeller: SEMI OPEN
- Max. Particle: 10 millimeters
- Main shaft seal: SiC/SiC
- Maximum hydraulic efficiency: 63%
- Approvals: LGA
- Curve tolerance: ISO9906:2012 3B2
Materials:
- Pump shell: Cast iron
- Pump housing: EN-GJL-250
- Impeller: Cast iron
- EN-GJS-500-7
Installation:
- Ambient temperature range: 0..40 °C
- Maximum operating pressure: 6 bar
- Flange standard: DIN
Interface
- Interface Model: NPT(M)
- Pump Outlet: DN 65
- Pressure Rating for Pipe Connection: PN 10
- Maximum Installation Depth: 7 meters
- Auto Coupling: 96090992
Electrical Data
- Power Input P1: 3.5 kW
- Rated Power - P2: 2.6 kW
- Power Supply Frequency: 50 Hz
- Rated Voltage: 3 x 400 - 415 V
- Voltage Tolerance: +6/-10 %
- Maximum Starting Cycles per Hour: 30
- Rated Current: 5.8 A
- Rated Current at 3/4 Load: 4.5 A
- Rated Current at 1/2 Load: 3.5 A
- Starting Current: 33 A
- No - Load Rated Current: 2.8 A
- Cos phi - Power Factor: 0.87
- Cos phi - Power Factor at No Load: 0.44
- Cos phi - Power Factor at 3/4 Load: 0.81
- Cos phi - Power Factor at 1/2 Load: 0.68
- Rated Driver Speed: 2870 revolutions per minute
- Locked Rotor Torque: 19 N·m
- Breakdown Torque: 24 N·m
- Moment of Inertia: 0.007 kg·m²
- Full - Load Motor Efficiency: 74 %
- Motor Efficiency at 3/4 Load: 75 %
- Motor Efficiency at 1/2 Load: 74 %
- Number of Motor Poles: 2
- Starting Method: Direct - on - line (DOL)
- Degree of Protection (IEC 34 - 5): IP68
- Insulation Class (IEC 85): F
- Explosion - Proof: N
- Self - Protection Standard: PTO
- Cable Type: H07RN - F
- Length of Power Cable: 10 meters
- Power Plug: No plug
Others
- Net Weight: 70.4 kg
- Gross Weight: 77.9 kg
