MAGNA1 D 100-120 F The Grundfos MAGNA1 D circulator pump is the simple option for a job well done. With its high energy efficiency the product lives up to the EuP 2015 regulations ensuring substantial savings on electricity, and with its intuitive, user-friendly interface and maintenance-free design, MAGNA1 D is the ideal circulator pump for basic performance needs in applications where basic system control and monitoring are desired. With this range of circulator pumps, everything from setup to basic control and monitoring are made easy. The pump is maintenance-free due to the canned-rotor type design. MAGNA1 D offers peace of mind due to the security of supply obtained by having a redundant pump, resulting in improved uptime. The flow, and thereby constant comfort, is secured because of its ability to automatically switch between pump heads if one breaks down. The two pumps communicate wirelessly. MAGNA1 D offers the possibility of monitoring the pump via the fault relay output. The digital start/stop input remotely controls the pump. The pump communicates wirelessly with the Grundfos GO Remote app and can also communicate via radio. MAGNA1 D can work as main pump in both heating and cooling applications, including:
- Mixing loops
- Heating surfaces
- Air-conditioning surfaces
- Ground-source heat pump systems
- Smaller chiller applications.
|
MAGNA1 D is a single-phase pump and characterised by having the controller and operating panel integrated in the control box. The pump housing is available in both cast-iron and stainless-steel versions. The composite rotor can is carbon-fibre reinforced, the bearing plate and rotor cladding are made of stainless steel and the stator housing is made of aluminium. The power electronics are air-cooled.
The pump incorporates a 4-pole synchronous, permanent-magnet motor (PM motor). This motor type is characterised by higher efficiency than a conventional asynchronous squirrel-cage motor. The pump speed is controlled by an integrated frequency converter
Circulating Pump MAGNA1 D 100-120 F Item number 99221452 Suitable for Commercial heating Commercial air conditioning District heating District cooling Domestic heating circulation Heat supply The latest high-end circulating pump solution with a large number of electronically controlled operating characteristics, so far exceeding the requirements of the EuP Directive. |  |
Product Name: MAGNA1 D 100-120 F
Product Number: 99221452
EAN Number: 5712608944246
Technology:
Maximum Head: 120 decimeters
TF Rating: 110
Approvals: CE, VDE, EAC, MOROCCO, UKCA, TSE, RCM, UkrSEPRO
Cavity Model: C
Materials:
Pump Casing: Cast Iron
Pump Housing: EN 1561 EN-GJL-250
Pump Casing: ASTM A48-250B
Impeller: Composite Installation
Ambient temperature range: 0.. 40 °C
Maximum operating pressure: 6 bar
Interface type: DIN
Size of connection: DN 100
Pressure rating for pipe connection: PN 6
Port-to-port length: 450 mm
Liquid
Liquid conveyed: Water
Liquid temperature range: -10.. 110 °C
Liquid temperature during operation: 60 °C
Density: 983.2 kg/m³
Electrical data
Maximum input power - P1: 1521 W
P1 min.: 31.21 W
Power supply frequency: 50 / 60 Hz
Rated voltage: 1 x 230 V
Minimum current consumption: 0.32 A
Maximum current consumption: 6.71 A
Maximum speed: 3642 revolutions per minute
Encapsulation class (IEC 34-5): X4D
Insulation class (IEC 85): F
Others
Energy (EEI): 0.22
Net weight: 62 kg
Gross weight: 71.8 kg
Transport volume: 0.207 m³
