Tianjin Shiny-Metals Technology Co., Ltd.
Shiny-Control Technology Develop (Beijing) Co., Ltd.
Add to Cart
Wilo DrainLift box Equipment For Lifting Sewage Inside Buildings
Address: Tianjin, China
Product Description
| Wilo DrainLift BOX is a device used for lifting sewage in buildings. It is compact in design, easy to install, and easy to maintain. Some models of sewage pumps have anti sedimentation and deodorization functions. Mains connection: 1~230 V, 50 Hz Discharge connection: 40 mm Inlet connection: 110 mm (DN 100) Ventilation connection: 110 mm (DN 100) Aplication field :The Wilo DrainLift BOX is used as a lifting device (ground mounted) or pump room (concealed floor mounted) inside buildings to discharge sewage from drainage points below the reflux level or drainage points that cannot be naturally drained downhill, ensuring smooth drainage of sewage inside buildings and avoiding water accumulation and sewage backflow problems. |  |
Your advantages
|
Compact and fully-automatic sewage lifting unit for above-ground and concealed floor installation within buildings.
For collection and pumping of the following in domestic areas:
Sewage not containing faeces
Sewage pumping according to 12050
The pumps meet the requirements of EN 12050-2.
DrainLift BOX ...
DrainLift BOX ... D
DrainLift BOX ... DS
| Example: | Wilo-DrainLift BOX-32/11HD DS O |
| BOX | Sewage lifting unit for sewage free of faeces |
| 32 | Nominal diameter discharge connection of the installed pump |
| 11 | Max. delivery head in m |
| HD | HD = Pump for aggressive fluids |
| D | Lifting unit version:
|
| S | Pump control:
|
| O | Installation type:
|
DrainLift BOX-32 ...
DrainLift BOX-40 ...
DrainLift BOX-32 ... and DrainLift BOX-32 ... D ...
Gas-tight and watertight collection reservoir made from plastic, with deposit-free interior. Two DN 100 connections at a 180° angle to each other for the inlet as well as venting and cable routing. The discharge connection is located at a 90° angle to the other two connections. For easy maintenance of the unit, the cover serves as an inspection opening.
Sewage pump with integrated turbulator (twister function), open multi-channel impeller and vertical threaded connection. Pump housing, strainer and impeller made of composite material. 1~ motor (jacket cooling) with integrated operating capacitor and self-switching thermal motor monitoring. Stainless steel motor housing. Oil-filled sealing chamber with double sealing: a rotary shaft seal is installed on the motor side, a mechanical seal on the pump side. Connection cable with float switch and fitted plug (CEE 7/7).
The twister function guarantees permanent turbulence within the pump's intake area. The turbulence prevents the settling sediments from sinking and settling. This ensures a clean pump sump and reduces the build-up of odours.
The level control takes place via the float switch attached to the pump. The “pump on/off” switching level is determined by the cable length of the float switch.
DrainLift BOX-32 ... DS ...
Gas-tight and watertight collection reservoir made from plastic, with deposit-free interior. Two DN 100 connections at a 180° angle to each other for the inlet as well as venting and cable routing. The discharge connection is located at a 90° angle to the other two connections. For easy maintenance of the unit, the cover serves as an inspection opening.
Sewage pump with integrated turbulator (twister function), open multi-channel impeller and vertical threaded connection. Pump housing, strainer and impeller made of composite material. 1~ motor (jacket cooling) with integrated operating capacitor and self-switching thermal motor monitoring. Stainless steel motor housing. Oil-filled sealing chamber with double sealing: a rotary shaft seal is installed on the motor side, a mechanical seal on the pump side. Connection cable with float switch and fitted plug (CEE 7/7).
The twister function guarantees permanent turbulence within the pump's intake area. The turbulence prevents the settling sediments from sinking and settling. This ensures a clean pump sump and reduces the build-up of odours.
The level control takes place via the separate float switch in the tank and a switchgear. The switchgear is preset. The “pump on” switching point is determined by the cable length of the float switch. The “pump off” switching point is defined by the set follow-up time in the switchgear. The switchgear offers the following functions:
Collective fault signal (SSM)
High water alarm – additional float switch available as an accessory
Integrated buzzer, mains-independent – 9 V rechargeable battery included in the scope of delivery
DrainLift BOX-40 ... and DrainLift BOX-40 ... D ...
Gas-tight and watertight collection reservoir made from plastic, with deposit-free interior. Two DN 100 connections at a 180° angle to each other for the inlet as well as venting and cable routing. The discharge connection is located at a 90° angle to the other two connections. For easy maintenance of the unit, the cover serves as an inspection opening.
Sewage pump with vortex impeller and vertical threaded connection. Hydraulics housing made of grey cast iron, impeller made of plastic. Surface-cooled 1~ motor with integrated operating capacitor and self-switching thermal motor monitoring. Stainless steel motor housing. Oil-filled sealing chamber with double sealing: a rotary shaft seal is installed on the motor side, a mechanical seal on the pump side. Detachable connection cable with float switch and fitted plug (CEE 7/7).
The level control takes place via the float switch attached to the pump. The “pump on/off” switching level is determined by the cable length of the float switch.
DrainLift BOX-40 ... DS ...
Gas-tight and watertight collection reservoir made from plastic, with deposit-free interior. Two DN 100 connections at a 180° angle to each other for the inlet as well as venting and cable routing. The discharge connection is located at a 90° angle to the other two connections. For easy maintenance of the unit, the cover serves as an inspection opening.
Sewage pump with vortex impeller and vertical threaded connection. Hydraulics housing made of grey cast iron, impeller made of plastic. Surface-cooled 1~ motor with integrated operating capacitor and self-switching thermal motor monitoring. Stainless steel motor housing. Oil-filled sealing chamber with double sealing: a rotary shaft seal is installed on the motor side, a mechanical seal on the pump side. Detachable connection cable with fitted plug (CEE 7/7).
The level control takes place via the separate float switch in the tank and a switchgear. The switchgear is preset. The “pump on” switching point is determined by the cable length of the float switch. The “pump off” switching point is defined by the set follow-up time in the switchgear. The switchgear offers the following functions:
Collective fault signal (SSM)
High water alarm – additional float switch available as an accessory
Integrated buzzer, mains-independent – 9 V rechargeable battery included in the scope of delivery
DrainLift BOX ... E
DrainLift BOX ... D
DrainLift BOX ... DS