Tianjin Shiny-Metals Technology Co., Ltd.
Shiny-Control Technology Develop (Beijing) Co., Ltd.
Add to Cart
Wilo NX Horizontal End Suction Centrifugal Pump For Water Treatment Industry
Address: Tianjin, China
Product Description
| Wilo NX is a stainless steel horizontal end suction centrifugal pump, made of stainless steel material and compliant with EN 733 standard.
Permissible temperature range of -20 °C to +120 °C Mains connection 3~400 V, 50 Hz Protection class IP55 Nominal diameter DN 32 to DN300 Standard. operating pressure 16 bar,25bar as option Aplication field :Wilo NX is suitable for conveying process fluids such as clean water, seawater, slightly polluted water, light oil, or similar water, and can be applied in fields such as seawater desalination, pure water treatment, and general industry. |  |
Your advantages
|
Stainless steel Baseplate pump with axial suction, in accordance with EN 733
Suitable for clean water, sea water, brackish water, high chloride ion water. light oils or process fluids,similar to water,slightly contaminated water or fluids without solid matter and not easy.
Applications in sea water desalination, pure water treatment,general industry, etc.
Single-stage low-pressure centrifugal pump in monobloc design with coupling, coupling guard, motor and baseplate
Mechanical seal
Permissible temperature range of -20 °C to +120 °C
Mains connection 3~400 V, 50 Hz
Protection class IP55
Nominal diameter DN 32 to DN300
Standard. operating pressure 16 bar,25bar as option
Stainless steel spiral with anti-rotation ribs.
With axially aligned suction piece and radial pressure ports and cast assembly feet.
Standard mechanical shaft seal for water up to between -10℃~+80℃, other temperatures are available on request
Single-stage centrifugal pump as baseplate pump with axial suction piece with flanged bearing bracket and axis mounting for flexibly coupled drives.
Spacer coupling (sleeve coupling) available as an option; they make it possible to leave the motor in position when removing the rotor unit.
Shaft deflection meets the requirements of ISO 5199.
Completely mountd pump on baseplate with motor
Installation and operating instructions
Accessories must be ordered separately
Counter flange
Fixation sets with anchor bolts
The pumps are exclusively intended for installation and operation in enclosed rooms. Typical installation locations are technical rooms
within the building with other domestic installations.
Before commissioning, the pump and electronic module must be at the ambient temperature.
Prime and vent the unit correctly.
Make sure that the pump does not run dry.