Tianjin Shiny-Metals Technology Co., Ltd.
Shiny-Control Technology Develop (Beijing) Co., Ltd.
Add to Cart
Wilo-Atmos GIGA-I (Cartridge)
Universal dry rotor pump for heating, air conditioning and cooling applications in large buildings.
Wilo-Atmos GIGA-I offers a wide range of components and materials for a wide range of applications. It can deliver a wide range of media from -20 to +140 °C, making it particularly suitable for air conditioning and refrigeration applications. The resulting condensed water is discharged through a targeted outlet.
The pump is equipped with advanced pump hydraulic components and IE3/IE4 motors for reliable and energy efficient operation.
Cast parts coated with an anti-corrosion electrophoretic layer also ensure a long service life.
Dry rotor pump in series construction with flange connection
Apply:
Pump heating water (according to VDI 2035), cold water and water-ethylene glycol mixture, free of abrasive substances in heating, cold water and cooling systems.
Type code:
| Give an example | Atmos GIGA-I 40/160-5.5/2 |
| I | In-line pump |
| 40 | Nominal diameter DN of pipe interface |
| 160 | Nominal impeller diameter |
| 5.5 | Motor rated power P2, unit kW |
| 2 | Number of poles |
Technical data:
| Fluid permissible temperature range: -20 °C to +140 °C |
| Maximum ambient temperature 40 °C |
| Mechanical seals are suitable for conveying water below maximum temperature Tmax. = +140 °C. At temperature T≤ +40 °C, ethylene glycol mixtures of 20% to 40% by volume are allowed to be transported. If the volume of ethylene glycol in the water-glycol mixture is > 40% and not more than 50%, the temperature of the medium is > +40 °C and not more than +120 °C, or there is a medium other than water, other mechanical seals must be provided. When using a mixture of water and ethylene glycol, the S1 model with the appropriate mechanical seal is generally recommended |
| Power connection 3~400 V, 50 Hz (other options available upon request) |
| Protection class IP55 |
| Nominal diameters DN 32 to DN 250 |
| Standard model, suitable for working pressure: 13 bar (Max +140 °C) /16 bar (Max +120 °C) |
Materials:
→Pump housing and coupling frame: Standard: EN-GJL-250 (gray cast iron);
→Impeller: Standard: EN-GJL-200; Special specifications: Bronze CuSn 10 Stainless steel 1.4408 impeller: Standard: EN-→GJL-200; Special specifications: Bronze CuSn 10 Stainless Steel 1.4408
→Axis: 1.4122
→Mechanical seal: AQEGG; Other mechanical seals are available on request
Type:
→Mechanical seal
→Flange connection with pressure measuring connection R 1/8
→coupler
→coupling
→IEC standard motor
Factory condition:
→Water pump
→Installation and operation instructions
Options:
| L1 with bronze impeller (extra charge) |
| L4 with stainless steel impeller (extra charge) |
| The P6 comes with a "pull back" design and a modular mechanical shaft seal |
| -H1 is available on request with a housing made of ductile iron |
| -P4 can reach a maximum working pressure of 25 bar upon request |
| Additional voltages and frequencies as well as ATEX certified models are available upon request |
